TAG | carpet
It can be extremely difficult to remove wax from carpet if you don’t know how to do it the right way. Use our tips to remove the wax quickly and easily.
For spilled wax on carpet, use a thick dry paper bag as a blotter and run a hot clothes iron over it. You can take the iron away and put it back on again to really heat the wax and soften it. It really works. In order not to damage your carpet, make sure you don’t touch iron to carpet without paper bag. The paper will absorb the candle wax. Be careful if your carpet is of synthetic fibers. The hot iron might melt the carpet. Keep moving the paper bag until all the wax is gone. The melted wax should have transferred from the carpet to the paper bag. So, after finishing the procedure just throw the bag away! Once wax is up your carpet looks like before! This procedure may take a long time but eventually it does work. You may have to repeat the procedure, but it is worth it!
Don’t spend your money on replacing the carpet. Just use our tried and tested ideas on how to remove the wax from your carpeting. Good luck!
We should face it that some stains are very hard to clean out. You can spend your efforts energy and time, but still don’t get any results.
Don’t worry even if you spill red wine on your carpet. With our hints you will easily and quickly get rid of all the stains. By using the proper stain removal method on your valuable carpeting you can remove most stains.
Of course, getting beverage stains out can be a daunting task. If you have to deal with the wine, beer or coffee stains, be aware that the best you can do is to clean them up before they have a chance to set. Use a proper cleaner to remove the stains. Blot the stain carefully, don’t rub it. If you find the stain dried on your valuable carpeting, follow the next steps. You should follow the correct procedure in order to remove red wine stains. Before treating the stained area always test the solution on an inconspicuous area to avoid further damage.
First of all pour hydrogen peroxide on the stain. Then, make a mixture of half water and half of a carpet cleaning shampoo and mist the stain. Blot dry with a clean cloth.
We hope our tips will help you combat with all the cleaning difficulties.
If you are a pet owner you just can’t skip the process of cleaning urine stains and smells. So, if you’re responsible for dealing with dog urine accidents, get down on your carpet and find that offensive urine spots.
No one likes a smelly carpet. But if your dog pees on the carpet it definitely leaves an unpleasant odor. Do you want to get rid of it quickly and inexpensively? Follow the next steps.
If you find the area that is still wet you should first attempt to absorb the dog urine. Place several layers of paper towels over the wet area and tread on it. Try to soak as much of the dog urine as possible.
The vinegar will neutralize the ammonia in the dog urine. Mix a solution of white vinegar and water in a proportion 1:1. Use a scrubbing brush to work the mixture into the carpet. It will ensure the mixture penetrates the carpet fibers below. Then place paper towel above to absorb the vinegar mixture. Wait until the stained area has dried. Then sprinkle baking soda over the soiled area.
Take a teaspoon of plain liquid dishwashing detergent and mix it with a half cup of hydrogen peroxide. This home remedy for cleaning dog urine from carpets or rugs is very easy and inexpensive. In addition, it method works even if the urine has dried and is old. Try this solution on an inconspicuous area before use. Pour the mixture over the baking soda. Work the mixture into the carpet using a scrubbing brush. Then leave the area to dry. Once the area is dried, use a vacuum cleaner to pick up the baking soda. You may need to repeat the cleaning process if the areas have been heavily soiled with dog urine.
Your carpet smells fresh and is free from urine odor!
Would you like to adorn your home with a nice and comfortable surface? Installing new carpet is a great idea if you want to enhance the beauty of your room. The surface to be carpeted should be smooth and clean. Sweep and vacuum the floor thoroughly. Start the installation process by measuring the longest walls in your room. To determine the square yardage multiply the width and length, and divide by 9. Add 10-15 percent to allow for errors and irregularities.
Cut the tackless strips to size with heavy snips or a strip cutter. Nail the strips 1/2″ from the wall. Tackless strips come in a variety of thicknesses, widths, and heights. Make sure you’re using the correct size. Cut away the padding along the inside edge of the strip.
The carpet will be easier to handle outside. If it’s possible, take the carpet outside, and notch the back on both sides at the appropriate length. You might want someone to help you. Take carpet back to the room. Cut away excess carpet. Where the carpet edges join, you’ll need to create a seam.
Place a piece of seaming tape under the seam, adhesive side up. Heat the seaming iron to the temperature recommended by the tape manufacturer, and rest it directly on the tape for 20 to 30 seconds. After the pieces are joined, place heavy objects on the seam to hold it in place as the glue dries.
Attach the carpet to the tackless strips at one end of the room. Trim excess carpet with a wall trimmer. When all the carpet is in place, cut out the vent openings. And now when you’re done, there is one more thing to keep in mind. Don’t forget that the process of installing the carpet is only the beginning. You need to take care of your carpeting. Regular cleaning and maintenance will prolong the life of your carpeting and ensure the carpet looks its best. Follow the manufacture instructions and carefully clean your carpeting. If you’re not sure that you are aware of how to properly care for the carpeting, ask for help. You can hire professional carpet cleaning services that know how to serve your needs working within your budget constraints. You can be confident that the carpet you have installed will be well kept for many years to come.
You should remember that your carpet need regular care. If you want your carpet to look as good as possible you should know how to deal with spills and stains that may occur. It’s well-known fact that if you allow your carpet to become and stay dirty, it will wear out much sooner. That’s why you need to act immediately when some wine or fruit juice spills on your carpet. The longer you wait to remove the stains from your carpet, the more time the stains have to set. Don’t wait for some miracle, take a clean, dry cloth and blot until no more of the stain can be lifted. Then, pour banking soda on the cloth and blot the stain carefully.
Another problem is how to remove urine stains from your carpet. Urine penetrates deeply into absorbent materials such as carpet. And it become quite difficult to remove urine from carpet fibers. It’s extremely difficult to remove all of the urine from the carpet. Banking soda can be used to remove urine stains as well. It can be used to eliminate surface odors. Dampen the stained area with clean water and sprinkle baking soda over it. Rub the baking soda into the soiled area. Then give it time to dry. Then brush or vacuum. Also, you can save your time, but still spend your money on more expensive cleaning products than banking soda. There are many commercial products you can buy to remove urine stains. So you can choose the way of removing urine stains. But be careful buying commercial products as they contain chemicals that can be dangerous for your health and may cause different allergies.
Removing stains from different surfaces
Stains removal is the most common and usual problem a housekeeper can face, and there is a lot of tips, helping you dispose of any stains. The shortlist of items, that are essential when you deal with stains, consists of hydrogen peroxide, a mild detergent without dyes and fragrances, isopropyl alcohol, vinegar and baking soda. Make sure that you have a spray bottle for solution and several clean terry cloths. Then, you have to determine the type of stains you face. The most popular type of it is stains on clothing. Cold water prevents it from setting, while pretreatment carried out with a mild detergent and water makes further washing much more efficient. If stain is on your carpet, vacuum it beforehand, then just blot with a mild detergent and rinse it with water. If the stain is tough, you can use hydrogen peroxide to blot it.
Cleaning stains and removing the odor
Baking soda is perfect when you need to fight the odor. Just cover the area of contamination with it and let it sit for several hours, vacuuming it afterwards. Facing tough stains is carried out the same way. For red wine spilled, cover the stain with salt: it will absorb the wine and will prevent it seeping deeper. Then blot it with white paper towels and cover the spot with baking soda, vacuuming it several hours later.